top of page

TECHNICAL SPECIFICATIONS

Frequency Ranges: 940 to 960 MHz – 200 to 240 MHz – 300 to 330 MHz or custom frequencies available

Frequency stability :  better than 5 ppm, 0 to 50 C (32 to 122 F)

Emission Class:    F3E

Output Impedance & Connector: Type N” 50 Ohms

Harmonic Frequencies Level (ref. to carrier):  < -65 dB

Spurious Frequencies Level (ref. to carrier):  < -80 dB

Input Impedance:  600 ohms or greater

Input Level: -6 dBm to +10 dBm nominal for ± 75 Khz deviation adj.

Mono Input ( with pre-emphasis) XLR Connector: pre-emphasis 50/75ms selectable bandwidth 30Hz – 15 KHz

attenuation at 19 KHz 40 dB or greater

deviation from pre-emphasis curve ± 0.4 dB

Multiplex Input :  BNC Connector Adj. from –3 dB to + 10 dB

Asyncronous AN S/N Ratio :  70 dB below ref.carrier with

100% AM Modulation, 75 usec. De-emphasis

Syncronous AM S/N Ratio: 65 dB below ref. Carrier with

100% AM modulation (FM modulation ± 75 Khz)

Distortion (THD): : 75kHz    < 0.04% dev

S/N Ratio (ref. to 50 kHz / 1000 Hz):

        Mono  > 70 dB  :   Stereo > 65 dB

SCA inputs, BNC Connectors:  3 inputs(1.5 V p-p)

Power Supply operating voltage : 100 –240 V direct input power consumption 50 / 70 VA battery powered (optional) 24 Vdc, 3A

Operating Conditions cooling                                   12Vdc fan

        operating temperature          0° to +50°C (32° to +122°F) relative humidity                    95% max.

Dimensions:          weight    10 Lbs / 4.5 kg

                                width         19” / 483mm

                                height       1.74” / 44mm

                                depth         18” / 457mm

Overview: Composite Aural Studio Link Transmitter

• Zero to 10, 20 or 50 watts output power, front panel adjustable
• Externally programmable in 25 Khz steps
• 3 SCA inputs
• RF monitoring BNC in the transmitter's front panel
• IF monitoring in the receiver's front panel
• All functions via LCD password protected
• Meets or exceeds all FCC and CCIR requirements
• Remote control software for monitoring (optional)

tsl910.png
bottom of page