|
NA
2001
2 KW FM Broadband MOSFET
Amplifier 87.5 - 108 MHz Range
Extremely high efficiency MOSFET
technology amplifier.
High gain PA, typically capable of
more than 2000 W output power with 20W drive input power.
Automatic gain control providing
fixed output power even in case of fluctuating drive power.
High reliability, easy handling and
consistent performance standard achieved among the various units due to total absence of
tuning requirements.
Compact size with lowest weight for
this size. (only 105 Lbs)
Meets or exceeds all FCC and CCIR
requirements.
Easily replaceable standard
components.
Advanced recycling overload and
protection system.
Proportional Auto-Foldback of
output power in the event of excessive VSWR.
Full remote control and telemetry
capability, with all main parameters on rear terminal connector.
TECHNICAL
SPECIFICATIONS:
AC Input Power: 220-240 Volts Single Phase
Frequency Range: 87.5-108 MHz
Typical input power: 15 –
20 W
Rated Output Power: 2000 W
RF Output Connector/Impedance: 7/8 EIA Connector/50 ohm
RF Input Connector/Impedance: "N" Connector/50 ohm
Spurious and Harmonic Suppression: > 70 dB
ALC output power stability: ± 3%
Power Consumption: 3600 watts
Total Consumption: 4500 VA
Overall Dimensions: 19" (487 mm) wide x 12,3" ( 312 mm) high x 26" (660
mm ) depth.
Weight: 105 Lbs (48 Kg)
Required Ambient Temperature Range: 0° to 45° C (32° to 113° F)
Maximum Humidity: 90%, non-condensing |
E-mail: info@NicomUsa.com
|
