TSL
910
Specifications
Frequency Ranges: 940 to 960 MHz 200 to 240 MHz 300 to 330 MHz
+other frequencies upon request
Output Impedance & Connector: 50 ohm type N female
Harmonic Frequencies Level (ref. to carrier): < -65 dB
Spurious Frequencies Level (ref. to carrier): < -80 dB
Input Impedance: 600 ohms or greater
Input Level: -6 dBm to +10 dBm nominal for +/-75 Khz deviation adj.
Mono Input ( with pre-emphasis): pre-emphasis 50/75us selectable
bandwidth 30Hz 15 KHz , attenuation at 19 KHz 40 dB or greater
Deviation from pre-emphasis curve +/- 0.4 dB
Stereo Input (flat):
bandwidth 20Hz 80KHz
Linearity (input at 500 Hz):
dev: 20Hz 40kHz < 0.2dB
dev: 40kHz 75kHz < 0.2dB
Distortion (THD): dev: 75kHz < 0.04%
S/N Ratio (ref. to 50 kHz / 1000 Hz):
mono > 80 dB
stereo > 75 dB
SCA inputs: 3 inputs(1.5 V p-p)
Power Supply
operating voltage 110/220 +/- 20% Vac
50/60 Hz
power consumption 50 / 70 VA
battery powered (optional) 15Vdc, 2A
Operating Conditions
cooling 15Vdc fan
operating temperature -20 to +40C (-4 to +104 F)
relative humidity 95% max.
Dimensions
weight 10 Lbs / 4.5 kg
width 19 / 483 mm
height 1.74 / 44 mm
depth 18 / 457 mm |
RSL 900 Specifications
Frequency Ranges: 940 to 960 MHz 200 to 240 MHz 300 to 330 MHz
+ other frequencies upon request
Input Impedance & Connector: 50 ohm type N female
Audio Frequency Output: 0 dBm at 600 ohms +/- 6dB adj.
IF Output: 0dBm at 10.7MHz / 50 ohms
De-emphasis: 50 / 75us
Input Voltage Range: 10uV 30mV rms
Image Rejection: >65dB
Spurious: 66dB
Lowest Threshold Squelch: 20uV
Distortion (THD): < 0.4% (typ 0.25)
Frequency Linearity (15Hz 100 kHz): +/-0.4dB
Signal to Noise Ratio: >75dB
Selectivity: -40dB at ±500KHz
Sensitivity: -62dBm for 60dB S/N
Power Supply: operating voltage 110/220 +/- 20% Vac 50/60 Hz
power consumption 30 VA
battery powered (optional) 15Vdc, 0.8A
Operating Conditions:
cooling convection
operating temperature -20 to +40 C (-4 to +104 F)
relative humidity 95% max.
Dimensions:
weight 10 Lbs / 4.5 kg
width 19 / 483 mm
height 1.74 / 44 mm
depth 18 / 457 mm |